To maintain compliance with federal and state regulations, facilities must track various scheduling requirements. To assist with this, you can set up Rules in your facility scheduling. Here’s how it works!
Setting Up Rules
1. Go to Facility Settings on the left side of the screen
2. Click on Rules then select the Department
3. Click on + Rule to add a new rule
4. Select the Positions the rule applies to, set the required Amount for that position, then specify whether the Requirement is based on Consecutive Hours or PPD (Per Patient Day)
5. Press Save and the rule will be added
How Rules Are Displayed
If your schedule does not meet the set criteria, a warning message will appear at the top of the Schedule page, alerting you to the issue.
By setting up Rules, you can proactively ensure compliance and avoid scheduling conflicts!